Images are representations only.
Endura AZ40 Oxygen & Carbon Monoxide Equivalent (COe) Analyzer
Brand: ABB GroupThe AZ40 oxygen and combustibles analyzer continuously samples and analyzes combustion waste gases, often referred to as flue gas. The AZ40 determines the levels of excess oxygen using a zirconia based oxygen sensor and unburnt fuel with an enhanced carbon monoxide detector to measure the carbon monoxide equivalent (COe).
Specifications
Brand
Span
- O2: mimum 0 to 5%, maximum 0 to 25%
- COe: minimum 0 to 500 ppm, maximum 0 to 20,000 ppm (2.00%)
Temperature Range
- Span: 260° to 1,649° C (500° to 3,000° F)
- Zero: -46° to 1371° C (–50° to 2,500° F)
Response Time
- Sensor to 63 % span (t63): O2 < 3.5 seconds, COe
Accuracy
- COe: ±20 ppm COe or ±2% of selected span whichever is greater (from 200 to 999 ppm); ±400 ppm COe or ±2% of selected span whichever is greater (from 1,000 to 20,000 ppm)
- O2: ±2.5% of reading or ±0.5% O2 whichever is greater
Thermocouple
- Type B, E, J, K, N, R, S and T
Operating Temperature
- Standard probe: –20° to 650° C (0° to 1,200° F)
- Interconnecting cable - Signal: –20° to 105° C (–4° to 221° F), Power: –40° to 105° C (–40° to 221° F)
- Sensor: –20° to 70° C (–4° to 158° F)
- Transmitter: –20° to 55° C (–4° to 131° F)
Storage Temperature
- –40° to 85° C (–40° to 185° F)
Humidity
- Up to 95 % RH, non condensing
Environmental Protection
- IP55 / NEMA 4
- IP66 / NEMA 4X
Power Supply
- 85-265 Vac, 50/60 Hz
Power Consumption
- Sensor: < 730 W during start up and < 310 W when operating
- Transmitter: < 60 W
Certifications & Approvals
- CE (EN61010)
- EMC
Probe Insertion Length
- High temperature probe: 600 too 1,550 mm (24" to 61")
- Standard probe: 600 to 2,660 mm (24" to 105")
Process Conenction
- DIN 80 / 100
- ANSI 2", ANSI 3", ANSI 4"
Pressure Range
- Procss: ±5 kPa (±20 in. WG)
Air Supply
- 207 kPa at 15 L/min
- 30.0 psi at 0.55 SCFM
Documentation
Manual
- Addendum - RoHS Directive | 2011/65/EU (RoHS II) pdf 556 KB
- Commissioning instruction – Endura AZ40 | Oxygen and carbon monoxide equivalent (COe) analyzer pdf 6.2 MB
- Communications supplement - Endura AZ40 | Oxygen and carbon monoxide equivalent (COe) analyzer | New product release pdf 1.7 MB
- Operating instruction - Endura AZ40 | Oxygen and carbon monoxide equivalent (COe) analyze pdf 12.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Smart electronics PCB pdf 1.3 MB
- Product guide - Maintenance services | Endura AZ20/AZ25/AZ30/AZ40 Combustion gas oxygen analyzers pdf 1.5 MB
- replacement procedure | Endura AZ40 | Sensor assembly | Aspirator kit pdf 1.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | CO sensor kit pdf 1.5 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Exhaust filter kit pdf 1.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Exhaust filter kit pdf 2.2 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | High temperature filter assembly kit pdf 1.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | High temperature probe assembly and seals kit pdf 1.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | O2 sensor kit pdf 1.5 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Orifice and seals kit pdf 2.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Primary and secondary filter spares kits pdf 1.3 MB
- Replacement procedure | Endura AZ40 | Sensor assembly | Sensor covers kit pdf 911 KB
- Replacement procedure | Endura AZ40 | Sensor assembly | Smart electronics cover spares kit pdf 908 KB
- Replacement procedure | Endura AZ40 | Transmitter | Main board spares kit pdf 950 KB
- Replacement procedure | Endura AZ40 | Transmitter | Processor / display board assembly kit pdf 910 KB
- Replacement procedure | Endura AZ40 | Transmitter | Terminal cover spares kit pdf 838 KB
- Replacement procedure | Endura AZ40 | Transmitter |SD media card spares kit pdf 811 KB
